仓酷云

标题: 带来一篇CentOS 6.4 电信ADSL 拨号毗连的设置 [打印本页]

作者: 冷月葬花魂    时间: 2015-1-14 20:10
标题: 带来一篇CentOS 6.4 电信ADSL 拨号毗连的设置
如果您觉得本篇CentOSLinux教程讲得好,请记得点击右边漂浮的分享程序,把好文章分享给你的小伙伴们!1.下载rp-pppoe-3.8.tar.gz
http://down1.chinaunix.net/distfiles/rp-pppoe-3.8.tar.gz
2.装置rp-pppoe(对文件地点文件夹右键在终端翻开)
解压rp-pppoe-3.8.tar.gz:

#tar-zxfrp-pppoe-3.8.tar.gz


进进天生的目次:


#cdrp-pppoe-3.8


在地点目次内运转剧本go:


#./go


将主动举行编译和装置


3、收集设置(白色为输出,蓝色为正文)

[root@Chengliaojch3]#pppoe-setup(输出pppoe-setup)


WelcometotheRoaringPenguinPPPoEclientsetup.
First,IwillrunsomechecksonyoursystemtomakesurethePPPoEclientisinstalledproperly...


Looksgood!


Now,pleaseentersomeinformation:


USERNAME
>>>EnteryourPPPoEusername(defaultcz743720):cz743720(输出上彀账号)

INTERFACE
>>>EntertheEthernetinte***ceconnectedtotheDSLmodem
ForSolaris,thisislikelytobesomethinglike/dev/hme0.
ForLinux,itwillbeethn,wherenisanumber.
(defaulteth0):eth0(选择你的网卡,默许为eth0)


Doyouwantthelinktocomeupondemand,orstayupcontinuously?
Ifyouwantittocomeupondemand,entertheidletimeinsecondsafterwhichthelinkshouldbedropped.
Ifyouwantthelinktostayuppermanently,enterno(twoletters,lower-case.)

NOTE:Demand-activatedlinksdonotinteractwellwithdynamicIP
addresses.Youmayhavesomeproblemswithdemand-activatedlinks.

>>>Enterthedemandvalue(defaultno):no(这里填no或间接回车)


DNS

PleaseentertheIPaddressofyourISPsprimaryDNSserver.
IfyourISPclaimsthattheserverwillprovideDNSaddresses,enterserver(alllower-case)here.
Ifyoujustpressenter,IwillassumeyouknowwhatyouaredoingandnotmodifyyourDNSsetup.>>>EntertheDNSinformationhere:202.96.128.86(输出首选DNS地点,这个很主要,我一入手下手看网上是填sever暗示主动猎取DNS,但没有乐成,
厥后我查了本人地点乡村DNS地点,这里是广东“其他区域”的首选DNS,倡议百度本人的DNS地点)


PleaseentertheIPaddressofyourISPssecondaryDNSserver.
Ifyoujustpressenter,IwillassumethereisonlyoneDNSserver.
>>>EnterthesecondaryDNSserveraddresshere:202.96.128.143(备用DNS地点,一样查一下)


PASSWORD


>>>PleaseenteryourPPPoEpassword:(输出暗码)


>>>Pleasere-enteryourPPPoEpassword:(再次输出暗码)



FIREWALLING


Pleasechoosethefirewallrulestouse.
Notethattheserulesareverybasic.
Youarestronglyencouragedtouseamoresophisticatedfirewallsetup;however,thesewillprovidebasicsecurity.
Ifyouarerunninganyserversonyourmachine,youmustchooseNONEandsetupfirewallingyourself.
Otherwise,thefirewallruleswilldenyaccesstoallstandardserverslikeWeb,e-mail,ftp,etc.
IfyouareusingSSH,theruleswillblockoutgoingSSHconnectionswhichallocateaprivilegedsourceport.

Thefirewallchoicesare:
0-NONE:Thisscriptwillnotsetanyfirewallrules.Youareresponsibleforensuringthesecurityofyourmachine.
YouareSTRONGLYrecommendedtousesomekindoffirewallrules.

1-STANDALONE:Appropriateforabasicstand-aloneweb-surfingworkstation

2-MASQUERADE:AppropriateforamachineactingasanInternetgateway
foraLAN

>>>Chooseatypeoffirewall(0-2):0(选择防火墙,0暗示不开启防火墙)


**Summaryofwhatyouentered**
Ethernet
Inte***ce:eth0

Username:cz743720

Activate-on-demand:No

PrimaryDNS:202.96.128.86

SecondaryDNS:202.96.128.143

Firewalling:NONE

>>>Acceptthesesettingsandadjustconfigurationfiles(y/n)?y(填y确认)




Adjusting/etc/ppp/pppoe.conf
Adjusting/etc/resolv.conf(Butfirstbackingitupto/etc/resolv.conf-bak)
Adjusting/etc/ppp/pap-secretsand/etc/ppp/chap-secrets(Butfirstbackingitupto/etc/ppp/pap-secrets-bak)(Butfirstbackingitupto/etc/ppp/chap-secrets-bak)


Congratulations,itshouldbeallsetup!


Typepppoe-starttobringupyourPPPoElinkandpppoe-stoptobring
itdown.Typepppoe-statustoseethelinkstatus.


[root@Chengliaojch3]#pppoe-start(用pppoe-start举行毗连)

.Connected!(毗连乐成,你能够用pingwww.baiud.com举行测试一下)

4、上彀下令(用root权限)
拨号上彀pppoe-start
断开上彀pppoe-stop
检察形态pppoe-status

欢迎大家来到仓酷云论坛!
作者: 乐观    时间: 2015-1-14 20:33
标题: 带来一篇CentOS 6.4 电信ADSL 拨号毗连的设置
顶顶更健康
作者: 仓酷云    时间: 2015-2-2 22:03
请问谁有Linux的学习心得的吗?简单的说说?
作者: 冷月葬花魂    时间: 2015-2-8 13:29
随着Linux技术的更加成熟、完善,其应用领域和市场份额继续快速增大。目前,其主要应用领域是服务器系统和嵌入式系统。然而,它的足迹已遍布各个行业,几乎无处不在。
作者: 小魔女    时间: 2015-2-25 19:32
老实说,第一个程序是在C中编译好的,调试好了才在Linux下运行,感觉用vi比较麻烦,因为有错了不能调试,只是提示错误。
作者: admin    时间: 2015-3-8 03:52
Linux?最大的优点在于其作为服务器的强大功能,同时支持多种应用程序及开发工具,所以Linux操作系统有着广泛的应用空间。
作者: 愤怒的大鸟    时间: 2015-3-16 03:07
然我们对Linux的学习首先是通过对它的产生,发展,到今天仍然在不断完善开始的。
作者: 变相怪杰    时间: 2015-3-22 20:10
在学习的过程中,我们用的是VM虚拟机,开始时真的不真的该怎么去做,特别是我的是命令窗口界面,别人的是图形界面,我都不知道怎么调过来。
作者: 飘飘悠悠    时间: 2015-3-22 20:10
选择一些适于初学者的Linux社区。




欢迎光临 仓酷云 (http://ckuyun.com/) Powered by Discuz! X3.2